ASUS Tinker Edge T Mini Motherboard Computer

•Google Edge TPU
•Advanced power design
•Tools for easy deploying ML model
•Friendly tools for burning images

AI accelerator (Edge TPU)
Tinker Edge T is a single-board computer (SBC) specially designed for AI applications. It features the Google Edge TPU, a machine learning (ML) accelerator that speeds up processing efficiency, lowers power demands, and makes it easier to build connected devices and intelligent applications. With this onboard ML accelerator, Tinker Edge T can perform four tera-operations per second (TOPS) using only 0.5 watts per unit of computation. It is also optimized for TensorFlow Lite models, making it easy to compile and run common ML models.

NXP i.MX 8M processor
With its powerful and modern quad-core ARM-based NXP i.MX 8M processors, Tinker Edge T offers a powerful solution for graphics, machine vision, video, audio, voice, and safety-critical applications. Tinker Edge T features 1 GB of LPDDR4 dual-channel memory, the 4th generation of low-power DDR DRAM technology, offering faster speeds and even lower power consumption for improved system performance and efficiency. Tinker Edge T also comes equipped with an onboard 8 GB eMMC and SD 3.0 interface that offers significantly faster read and writes speeds for the OS, applications and file storage.

SoC
NXP i.MX 8M
CPU
Quad-core Arm Cortex-A53 at 1.5GHz, Cortex-M4
GPU
GC7000 Lite
NN Processor
Google Edge TPU ML accelerator coprocessor
Memory
Dual-CH LPDDR4 1GB
Storage
8GB eMMC
1xMicro SD(TF) card slot (pull and push)
Display
1xHDMI with CEC hardware ready
1x22-pin MIPI DSI
USB
2xUSB3.2 Gen1 Type-A ports
1xUSB3.2 Gen1 Type-C OTG port
Camera Interface
2x24-pin MIPI CSI-2
Internet
PTL8211F-CG Gbit LAN
802.11 b/g/n/ac and Bluetooth 4.1
Internal I/O
1x40-pin headers include:
- up to 28 x GPIO pins
- up to 1 x SPI bus
- up to 2 x I2C bus
- up to 2 x UART
- up to 3 x PWM
- up to 1 x PCM/I2S
- 2 x 5V power pins
- 2 x 3.3V power pins
- 8 x ground pins
1 x Boot mode switch
1 x 2-pin Reset header
1 x 2-pin DC Fan header
Power requirement
12-19V DC input
Operation Temperature
0 - 50 C
Non-Operation Temperature
-40 - 85 C
Relative Humidity
0% - 85%
Operating System Support
Linux Mendel
Form Factor
3.37" x 2.125"
Item Dimension (L"x W"x H")
6 x 5 x 2
Weight
1.00 LB
Warranty Information
1 Year